Short: RFID Control PRG for codatex Reader Author: Christian Kummerow Uploader: CHRKUM web de Type: util/misc Version: 0.8 BETA 11.03.2007 Architecture: m68k-AmigaOS Amiga RFID Control V0.8 Beta by C.Kummerow Email: CHRKUM at web.de Homepage: http://people.freenet.de/CHRAmiga.de (neuste Version des Programms ist dort zu finden) ---For English look down--- Vorraussetzungen: Betriebssystem: OS3.1-OS3.9 Prozessor: 68020-68060 Ram: mind. 2 MB Frei Workbenchauflösung von mind. 640x256 mit 8 Farben PNG-Datatype Empfohlen: Betriebssystem: >=OS3.5 Grafikkarte/Workbenchauflösung von >=680x512 >=16 Bit Getestet auf: A1200 68060@60MHZ OS3.9 BVision A1200 68020@14 MHZ OS3.1 AGA A4000 68040@40 MHZ OS3.9 CVision Was ist es? Amiga RFID Control dient zum Auslesen und Konfigurieren der RFID Lese Geräte von Schäffel Electronic GmbH(www.codatex.com). Diese werden von Hauptsächlich www.conrad.de Vertrieben, sind aber auch z.B. bei Ebay erhältlich. Unterstützt werden Version 4 und 7. Dieses Programm ist nicht von der Firma Schäffel Electronic GmbH. Installation: Einfach das Programm(+Enthaltene Dateien) an eine beliebige stelle Kopieren. ToolTypes ggf. ändern. Benutzung: Hardware seitig 1:1 Serial Kabel anstecken. Software ist eigentlich selbst erklärend. Unter Transponder kann man die Berechtigen Transponder einsehen, löschen, Zeitfenster ändern und neue Hinzufügen. Fügt man einen neuen Transponder hinzu, muss man die Zeitfenster setzten, falls vorher noch nie ein Transponder an diese Position war. Unter Parameter kann man den Leser Konfigurieren und die Schaltzeit des Relais einstellen Unter Ereigniss kann man die Ereignisliste des Lesers ansehen, Speichern und Löschen. Das löschen bezieht sich auf die Gesamte liste. Unter Uhrzeit kann man sie Real Time Clock vom Leser einsehen und mit der Amiga-Zeit Syncronisieren. Die Daten werden auf korrekten CRC geprüft. ToolTypes: Device - Serielle Schnittstelle z.B. Device=hyperCOM3.device Unit - Unit zu dieser Schnittstelle z.B. Unit=0 Startdir - Anfangsverzeichniss für den Auswahlrequester z.B. Startdir=Work:Ereignisse/ BUGS: Ab und an kommt es vor das der Leser auf ein Kommando nicht oder mit Not Acknowledge reagiert, in solch einen fall wird das Kommando einfach wiederholt, der User wird nicht behelligt. Scheint ein Bug in der Firmware des Lesers zu sein oder eine begrenzung(Leser hat was anderes zu tun?) Weden die Ereignisse gelöscht, dann ein Transponder ins Feld gehalten und die Ereignisse neu gelesen erscheinen 2 Einträge, einer ist alt und einer ist aktuell. Scheint auch ein Fehler in der Firmware zu sein, der Ereignisszähler wird auf 2(statt auf eins) gesetzt und das Ereigniss an dieser Position geschrieben. Bugreports, Anregungen etc. sind erwünscht. Copyright (C) 2007 Christian Kummerow Dieses Programm ist Freeware, KEINE Garantie für Funktion/Fehlerfreiheit sowie Folgeschäden an Software oder Hardware! English: Im not so good in English, if you something don`t understand ask. Minimum System Requirement: Operatingsystem: OS3.1-OS3.9 Processor: 68030-68060 Ram: mind. 2 MB Free Workbenchresolution min. 640x256 with 8 Colors PNG-Datatype Recommended: OS: >=OS3.5 Graphiccard/Workbenchresolution >=680x512 >=16 Bit Tested On: A1200 68060@60MHZ OS3.9 BVision A1200 68020@14 MHZ OS3.1 AGA A4000 68040@40 MHZ OS3.9 CVision What is it? Amiga RFID Control reads out and Adjust the RFID Readers from Schäffel Electronic GmbH(www.codatex.com). This one`s are mostly distributed by www.conrad.de, but you can buy it too on Ebay. Supported are Version 4 and 7. This is not a Programm from the Company Schäffel Electronic GmbH. Installation: Copy the Programm with his Files on any Position. You can change the ToolTypes. Using: Hardware- Use a 1:1 Serial Kabel. Software: It`s in German but you easy find out how its work. If not Ask Transponder: here you can see all Authorize Transponders, delete(X), change the Timewindow or Add(NEU) new ones. For a new Transponder you have to Click on New and then hold the new Transponder in the Field. Parameter: here you can set the Configuration of the Reader and Set the Switchtime of the Relais. The Order is: Bit 0 Bit 4 Bit 1 Bit 5 Bit 2 Bit 6 Bit 3 Switchtime Bit 7 Ereigniss: here you see the Event List of the Reader, Save(Speichern) it or delete(X All) it. The delete is for the whole List. Uhrzeit: here you see the Real Time Clock of the Reader and you can synchronize it with the Amiga Time. The Data are checked if they have the right CRC. ToolTypes: Device - Serial Device for Example: Device=hyperCOM3.device Unit - Unit for the Device for Example: Unit=0 Startdir - Startdir for the FileRequester for Example: Startdir=Work:Events/ BUGS: Sometimes it happends that the Reader don`t answer to a Command or give a Not Acknoledge back. If this is happend the Command a simply send again, the don`t get a Message if this happend. This seems to a Bug of the Reader Firmware, or a Limitation(maybe the Reader have to do someting else) If you delete a Event, Put a Transponder in the Field and read out the Events again. Now you have to Events, a old one and a new one. This seems too a error in the Firmware, the Eventpointer is set to 2(should one) and the Event is written too on this Position. You can send me Bugreports and so on. Copyright (C) 2007 Christian Kummerow This Programm is Freeware. You use this software at your own risk! I can never be held responsible for any sort of damage to your software or hardware by the use of this product!